اسمارت Inserter SI20

I. هدف و موقعیت محصول SI20
SI20 یک سیستم نیمه اتوماتیک است که امکان فشار دادن ۱ یا چند بار ماژول تراشه را فراهم می کند.
صفحه ایزو یا حسگر اثر انگشت روی کارت.سر پرس امکان بازتولید یک جاسازی استاندارد را فراهم می کند
این فرآیند معمولاً با سر اولی که قطعه را گرم می کند و سر دوم آن را خنک می کند.
هر پارامتر تعبیه را می توان کنترل کرد از جمله دمای پرس، زمان پرس و
نیروی فشار
این سیستم ساده و مقرون به صرفه امکان انجام تست‌های مختلف تعبیه‌سازی روی کارت‌ها را در تنظیم نما فراهم می‌کند
قبل از پیاده سازی آن در یک سیستم بزرگتر مانند SI700 پردازش کنید. برای برخی از پروژه های خاص که در آن:
– اجزای خاص یا جدید باید روی کارت ها تعبیه شوند، مانند یک حسگر اثر انگشت خاص،
– مواد کارت خاصی باید استفاده شود، مانند کارت های فلزی یا موارد دیگر،
– باید از یک چسب خاص/جدید و/یا چسب رسانا استفاده شود.
– یک فرآیند تعبیه خاص،
– یک آزمایش، آزمایش یا آزمایش باید با استفاده از مقدار کمی کارت انجام شود،
پس SI20 سیستم عالی برای اعمال این عناصر جدید و پارامترهای جاسازی مرتبط است
روی مقدار کمی کارت، قبل از راه اندازی یک تولید.

SI20 عمدتاً برای اهداف مهندسی استفاده می شود. از استفاده از سیستم تولید برای تمرین اجتناب می کند
فناوری جدید یا محصولات کارتی جدید. این طراحی شده است تا حداکثر انعطاف پذیری را به ارمغان بیاورد:
– تمام پارامترهای فرآیند تعبیه قابل تنظیم هستند: دما، نیروی فشار، زمان فشار.
– می تواند ماژول های تراشه، صفحات تماس و حسگرهای اثر انگشت را در هر موقعیتی روی کارت جاسازی کند.
به جز ۱ میلی متر از لبه راست/چپ کارت، و ۲ میلی متر از بالا/پایین کارت.
– هدهای پرس را می توان به راحتی تغییر داد تا با طراحی اجزا مطابقت داشته باشد
ماژول تراشه / صفحه تماس / حسگر اثر انگشت استفاده شده است.
– از مواد مختلف کارت پشتیبانی می کند: PC، PVC، ABS، PET، کامپوزیت، فلز.
– می توان از آن برای تولید دستی حجم های کوچک کارت استفاده کرد، از جمله:
کارت های تماس، با یک تراشه یا چند تراشه
کارت های رابط دوگانه
کارت های بیومتریک

II. SI20 توضیحات محصول
SI20 یک سیستم سر پرس نیمه اتوماتیک است که نیاز به استفاده از کارت های آسیاب شده و تراشه / تماس دارد.
صفحات/حسگرهایی که قبلاً با چسب چسبی لمینت شده اند، همانطور که در زیر نشان داده شده است.

*برای اطلاع از قیمت لیزر پرینتر با کارشناس فروش تماس حاصل فرمایید.

I. SI20 product objective and positioning
The SI20 is a semi-automatic presser heads system allowing pressing 1 or several times a chip module, an
ISO plate or a fingerprint sensor on a card. The 2 presser heads allow reproducing a standard embedding
process, typically with the first head heating the component, and the second head cooling it.
Each embedding parameters can be controlled including the pressing temperature, the pressing time, and
pressure force.
This simple and affordable system allows performing various embedding tests on cards in a view tuning a
process before implementing it into a bigger system like the SI700. For some particular projects where:
– specific or new components need to be embedded on cards, like a particular fingerprint sensor,
– particular card material needs to be used, like metal cards or others,
– a particular/new adhesive and/or conductive glue need to be used,
– a particular embedding process,
– a pilot, experiment or tests need to be conducted using a small quantity of cards,
then the SI20 is the perfect system to exercise these new elements and related embedding parameters
on a small quantity of cards, before launching a production

The SI20 is mainly used for engineering purposes. It avoids using a production system to exercise a
new technology or new card products. It has been designed to bring a maximum of flexibility:
– All embedding process parameters are adjustable: temperature, pressure force, pressure time.
– It can embed chip modules, contact plates and fingerprint sensors in any position on the card,
except 1mm from the right/left edge of the card, and 2mm from the top/bottom of the card.
– Presser heads can be easily changed to accommodate the component design, depending on the
chip module / contact plate / fingerprint sensor used.
– It supports various card materials: PC, PVC, ABS, PET, composite, metal.
– It can be used to manually produce small volumes of cards, including:
o Contact cards, with a single chip or with multiple chips
o Dual interface cards
o Biometric cards

II. SI20 Product description
The SI20 is a semi-automatic presser heads system requiring using cards already milled and chips/contact
plates/sensors already laminated with an adhesive glue, as illustrated belo

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *