اسمارت Inserter SI700

Smart Inserter 700: سیستم تعبیه بیومتریک و چیپ

تعهد STS: روندهای بازار کارت را درک و پیش بینی کنید

نمای کلی Smart Inserter 700 (SI700).
SI700 پیشنهادی برای تراشه، صفحه تماس و برای تعبیه حسگر اثر انگشت یک پیکربندی است
بهینه سازی شده برای تعبیه چنین اشیایی، اجازه می دهد تا تکرارپذیری و دقت خوبی را در طول زمان حفظ کنید
تولید کارت همچنین شامل مناطق فضایی است که امکان اضافه کردن ایستگاه های خاص، مانند بازرسی بینایی را فراهم می کند
ایستگاه و ایستگاه تست تراشه، یا سر پرس داغ اضافی.
پیکربندی استاندارد شامل ایستگاه های زیر است که در زیر نشان داده شده است:
۱٫ یک ایستگاه فرمان که تحت ویندوز ۱۰ اجرا می شود و شامل HMI (رابط ماشین انسانی) است.
نرم افزار
۲٫ یک ایستگاه ورودی کارت، قادر به ذخیره ۱۰۰ کارت
۳٫ یک ایستگاه رایگان که می تواند برای بازرسی بینایی با استفاده از سنسور بینایی استفاده شود
۴٫ یک ایستگاه تعبیه حسگر اثر انگشت
۵٫ یک ایستگاه رایگان که می تواند برای بازرسی بینایی، با استفاده از سنسور بینایی استفاده شود
۶٫ اولین ایستگاه سر پرس داغ
۷٫ دومین ایستگاه سر پرس داغ
۸٫ یک ایستگاه رایگان که می تواند برای پشتیبانی از یک هد پرس داغ اضافی یا برای پشتیبانی از یک سر آزمایش استفاده شود
کارت را تست کنید
۹٫ ایستگاه رایگان دیگری که می تواند برای پشتیبانی از یک هد پرس داغ اضافی یا برای پشتیبانی از یک آزمایش استفاده شود
برای تست کارت سر بزنید
۱۰٫ یک ایستگاه خروجی، قادر به ذخیره ۱۰۰ کارت
۱۱٫ ایستگاه رد کارت

قادر به تعبیه تراشه و سنسور به طور همزمان نیست. می تواند تراشه / صفحه تماس یا
سنسور با نصب ابزار پانچ (که “ابزار برش” نیز نامیده می شود) مطابق با طراحی دقیق
تراشه یا سنسور سرهای داغ پرس در ایستگاه سر پرس (که در زیر توضیح داده شده است) نیز نیاز دارند
با طراحی دقیق تراشه یا سنسور مطابقت دارد.
ایستگاه جاسازی از یک سیستم انتخاب و مکان استفاده می‌کند که اجازه می‌دهد تمام تراشه‌ها از فیلم یا همه سنسورها منگنه شوند
از فیلم و آنها را در هر کارت جاسازی کنید. این راه حل مزایای زیر را به همراه دارد:
دقت و تکرارپذیری خوب در تولید کارت. انتخاب
راه حل & مکان بر اساس سیستم هایی است که قبلاً در بزرگ استفاده شده است
ماشین های جاسازی پایداری بالا و پایین را نشان داد
رد نرخ در طول تولید انبوه با چندین سیستم از این قبیل
در جهان.
می توان از همان ایستگاه جاسازی برای جاسازی استفاده کرد
تراشه ها / صفحات تماس یا حسگرهای اثر انگشت (اما نه هر دو در
همان زمان). تعویض سریع ابزار برش و پرس
heads فقط برای پیکربندی تعبیه از مورد نیاز است
تراشه / صفحات تماس با حسگرها، یا برعکس.
ابزار پانچ یا ابزار جمع‌آوری تراشه/صفحه تماس یا حسگر را از قبل گرم می‌کند تا اجازه بماند
پس از تعبیه شدن در حفره و قبل از انتقال کارت به ایستگاه هد پرس داغ. این
اجازه می دهد تا از حرکت سنسور یا تراشه / صفحه تماس در حفره یا پرش در طول کارت جلوگیری شود
جنبش.

*برای اطلاع از قیمت لیزر پرینتر با کارشناس فروش تماس حاصل فرمایید.

Smart Inserter 700 : Biometric & Chip embedding system

STS commitment: understand and anticipate card market trends

Smart Inserter 700 (SI700) overview
The proposed SI700 for chip, contact plate and for fingerprint sensor embedding is a configuration
optimized for embedding such objects, allowing keeping a good repeatability and accuracy during the
production of cards. It also includes space areas allowing adding particular stations, such a vision inspection
station and chip testing station, or additional hot presser heads.
The standard configuration includes the following stations, as illustrated below:
۱٫ A command station, running under Windows 10 and including HMI (Human Machine Interface)
software
۲٫ A Card Input station, able to store 100 cards
۳٫ A free station that can be used for vision inspection using a vision sensor
۴٫ A fingerprint sensor embedding station
۵٫ A free station that can be used for vision inspection, using a vision sensor
۶٫ A first hot presser head station
۷٫ A second hot presser head station
۸٫ A free station that can be used to support an additional hot presser heads, or to support a test head to
test the card
۹٫ Another free station that can be used to support an additional hot presser heads, or to support a test
head to test the card
۱۰٫ An output station, able to store 100 cards11. A card reject station

not able to embed both a chip and a sensor at the same time. It can embed either the chip/contact plate or
the sensor by installing the punching tool (also called “cutting tool”) corresponding to the exact design of
the chip or the sensor. The hot presser heads at the presser head station (described below) also needs to
correspond to the exact design of the chip or the sensor.
The embedding station uses a pick & place system allowing punching all chips from the film or all sensors
from the film and embed them into each card. This solution brings the following advantages:
o A good accuracy and repeatability in card production. The pick
& place solution is based on systems already used on big
embedding machines. It demonstrated a high stability and low
reject rates during mass productions with several such systems
in the world.
o The same embedding station can be used to embed
chips/contact plates or fingerprint sensors (but not both at the
same time). A quick replacement of the cutting tool and presser
heads is just needed to configure the embedding from
chips/contact Plates to sensors, or vice-versa.
o The punching tool or pick-up tool will pre-heat the chip/contact plate or the sensor to allow it staying
in the cavity once it is embedded, and before moving the card to the hot presser heads station. This
allows avoiding the sensor or chip/contact plate to move in the cavity or jump during the card
move

اسمارت Punch SPU20

واحد پانچ دستی SPu20 اجازه می دهد تا یک تراشه، یک صفحه تماس یا یک حسگر اثرانگشت را خارج کنید
فیلم، یکی یکی سپس می توان با استفاده از SI20، قطعه را به صورت دستی در یک حفره کارت جاسازی کرد

سیستم پانچ دستی SPu20 با یک ابزار قالب و پانچ طراحی شده برای تناسب با
جزء به پانچ.
ابزار Die & Punch را می توان با مجموعه دیگری جایگزین کرد تا از طراحی اجزای دیگری پشتیبانی کند
به عنوان مثال یک تراشه (۶ یا ۸ پین) یا یک صفحه تماس.
SPu20 برای سنسورهای IDEX مورد نیاز نیست زیرا می توان آنها را به راحتی به صورت دستی از خط کاغذ جدا کرد.
SPu20 ساخت فرانسه است.

*برای اطلاع از قیمت لیزر پرینتر با کارشناس فروش تماس حاصل فرمایید.

The SPu20 manual punching unit allows getting a chip, a contact plate or a fingerprint sensor out of a

film, one by one. The component can then be manually embedded into a card cavity using the SI20

The SPu20 manual punching system is supplied with a die & punch tool designed to fit with the
component to punch.
The die & punch tool can be replaced with another set to support another component design, for
instance a chip (6 or 8 pins) or a contact plate.
The SPu20 is not needed for IDEX sensors as they can be easily removed manually from the paper-line.
The SPu20 is made in France.

اسمارت Inserter SI20

I. هدف و موقعیت محصول SI20
SI20 یک سیستم نیمه اتوماتیک است که امکان فشار دادن ۱ یا چند بار ماژول تراشه را فراهم می کند.
صفحه ایزو یا حسگر اثر انگشت روی کارت.سر پرس امکان بازتولید یک جاسازی استاندارد را فراهم می کند
این فرآیند معمولاً با سر اولی که قطعه را گرم می کند و سر دوم آن را خنک می کند.
هر پارامتر تعبیه را می توان کنترل کرد از جمله دمای پرس، زمان پرس و
نیروی فشار
این سیستم ساده و مقرون به صرفه امکان انجام تست‌های مختلف تعبیه‌سازی روی کارت‌ها را در تنظیم نما فراهم می‌کند
قبل از پیاده سازی آن در یک سیستم بزرگتر مانند SI700 پردازش کنید. برای برخی از پروژه های خاص که در آن:
– اجزای خاص یا جدید باید روی کارت ها تعبیه شوند، مانند یک حسگر اثر انگشت خاص،
– مواد کارت خاصی باید استفاده شود، مانند کارت های فلزی یا موارد دیگر،
– باید از یک چسب خاص/جدید و/یا چسب رسانا استفاده شود.
– یک فرآیند تعبیه خاص،
– یک آزمایش، آزمایش یا آزمایش باید با استفاده از مقدار کمی کارت انجام شود،
پس SI20 سیستم عالی برای اعمال این عناصر جدید و پارامترهای جاسازی مرتبط است
روی مقدار کمی کارت، قبل از راه اندازی یک تولید.

SI20 عمدتاً برای اهداف مهندسی استفاده می شود. از استفاده از سیستم تولید برای تمرین اجتناب می کند
فناوری جدید یا محصولات کارتی جدید. این طراحی شده است تا حداکثر انعطاف پذیری را به ارمغان بیاورد:
– تمام پارامترهای فرآیند تعبیه قابل تنظیم هستند: دما، نیروی فشار، زمان فشار.
– می تواند ماژول های تراشه، صفحات تماس و حسگرهای اثر انگشت را در هر موقعیتی روی کارت جاسازی کند.
به جز ۱ میلی متر از لبه راست/چپ کارت، و ۲ میلی متر از بالا/پایین کارت.
– هدهای پرس را می توان به راحتی تغییر داد تا با طراحی اجزا مطابقت داشته باشد
ماژول تراشه / صفحه تماس / حسگر اثر انگشت استفاده شده است.
– از مواد مختلف کارت پشتیبانی می کند: PC، PVC، ABS، PET، کامپوزیت، فلز.
– می توان از آن برای تولید دستی حجم های کوچک کارت استفاده کرد، از جمله:
کارت های تماس، با یک تراشه یا چند تراشه
کارت های رابط دوگانه
کارت های بیومتریک

II. SI20 توضیحات محصول
SI20 یک سیستم سر پرس نیمه اتوماتیک است که نیاز به استفاده از کارت های آسیاب شده و تراشه / تماس دارد.
صفحات/حسگرهایی که قبلاً با چسب چسبی لمینت شده اند، همانطور که در زیر نشان داده شده است.

*برای اطلاع از قیمت لیزر پرینتر با کارشناس فروش تماس حاصل فرمایید.

I. SI20 product objective and positioning
The SI20 is a semi-automatic presser heads system allowing pressing 1 or several times a chip module, an
ISO plate or a fingerprint sensor on a card. The 2 presser heads allow reproducing a standard embedding
process, typically with the first head heating the component, and the second head cooling it.
Each embedding parameters can be controlled including the pressing temperature, the pressing time, and
pressure force.
This simple and affordable system allows performing various embedding tests on cards in a view tuning a
process before implementing it into a bigger system like the SI700. For some particular projects where:
– specific or new components need to be embedded on cards, like a particular fingerprint sensor,
– particular card material needs to be used, like metal cards or others,
– a particular/new adhesive and/or conductive glue need to be used,
– a particular embedding process,
– a pilot, experiment or tests need to be conducted using a small quantity of cards,
then the SI20 is the perfect system to exercise these new elements and related embedding parameters
on a small quantity of cards, before launching a production

The SI20 is mainly used for engineering purposes. It avoids using a production system to exercise a
new technology or new card products. It has been designed to bring a maximum of flexibility:
– All embedding process parameters are adjustable: temperature, pressure force, pressure time.
– It can embed chip modules, contact plates and fingerprint sensors in any position on the card,
except 1mm from the right/left edge of the card, and 2mm from the top/bottom of the card.
– Presser heads can be easily changed to accommodate the component design, depending on the
chip module / contact plate / fingerprint sensor used.
– It supports various card materials: PC, PVC, ABS, PET, composite, metal.
– It can be used to manually produce small volumes of cards, including:
o Contact cards, with a single chip or with multiple chips
o Dual interface cards
o Biometric cards

II. SI20 Product description
The SI20 is a semi-automatic presser heads system requiring using cards already milled and chips/contact
plates/sensors already laminated with an adhesive glue, as illustrated belo

اسمارت evol se1000

طراحی شده برای هدف قرار دادن چندین بازار از جمله id.
مراقبت های بهداشتی، گواهینامه رانندگی، مالی، حمل و نقل، وفاداری

ماشین های رومیزی مدولار SE 1000
ماشین‌های رومیزی SMART EVOL 1000 «ساخت فرانسه» با دقت، مهارت و آخرین فناوری‌های هوشمند ساخته شده‌اند. قدرت، عملکرد و قابلیت اطمینان هر SMART EVOL 1000 بر اساس سه چیز است که قلب فناوری ما را تشکیل می دهد.

شخصی سازی سری کارت های هوشمند کوچک (۱ تراشه، ۲ تراشه، ۴ تراشه)
مدیریت بازسازی کارت ها
انجام کنترل های کیفیت
فرآیندها را قبل از عرضه برای تولید انبوه تأیید کنید.

*برای اطلاع از قیمت لیزر پرینتربا کارشناس فروش تماس حاصل فرمایید.

desingned to target multiple markets including id .
health care,driving license,financial,transport ,loyalty

SE 1000 modular desktop machines
SMART EVOL 1000 desktop machines are made « MADE IN France » with care, craftsmanship, and the latest smart technologies. The strength, performance and reliability of every SMART EVOL 1000 are based on three things that make up the heart of our technology.

personalize small smart card series (1 chip, 2 chips, 4 chips)
manage cards remakes
perform quality controls
validate processes before they are released for mass production.

اسمارت evol30

راه حل های شخصی سازی و تولید کارت میان رده STS
SE 1000: راه حل شخصی سازی مدولار (ID، مالی، GSM..)
SI 700: سیستم تعبیه بیومتریک و تراشه خودکار
SI 20: پرس نیمه اتوماتیک برای تراشه ها، صفحات تماس و سنسورهای بیومتریک
SPU 20: سیستم پانچ دستی برای تراشه ها، صفحات تماس و حسگرهای بیومتریک
SE 30: سیستم شخصی سازی دسکتاپ لیزری

مبتنی بر سیستم‌های لیزری mpix، se30 از لیزرهای ۳ وات ۱۰ وات و ۲۰ وات لیزرهای تمام مقیاس خاکستری پشتیبانی می‌کند.

اجازه چاپ اشیاء مختلف را می دهد: آرم ،عکس، بارکد، تکس

se30 همچنین از جلوه های چاپی مختلف از جمله منحنی های microtex پشتیبانی می کند.

se30 می تواند علاوه بر مواد کارت پلاستیکی سنتی مانند پلی کربنات، روی کارت های فلزی نیز چاپ کند

*برای اطلاع از قیمت اسمارت evol 30 با کارشناس فروش تماس حاصل فرمایید.

based onmpix laser systems the se30 supports3 watts 10watts and 20 watts lasers all greyscale
the allow printing various objects: tex barcode image photo logos
the se30 also supports various printimg effects including microtex curves ghost inage tactile effect shadow effect

the se30  is able to print on metal cards in addition to traditional plastic card materials like polycarbonat

لیزر کارت سوییفت پرو

  • حکاکی لیزری با وضوح بالا ۱۲۰۰ DPI
  • وضوح چاپ رنگی ۶۰۰ DPI و ۳۰۰ DPI
  • چاپ ماورا بنفش
  • CLI یا MLI اختیاری
  • ماژول لمینیتور جهت ماندگاری و دوام بیشتر کارتها

 

SwiftLaser™ یک راه‌حل ایده‌آل برای چاپگر برای برنامه‌های شناسایی دولتی و شهروندان است که به شما امکان می‌دهد لیزر، چاپ رنگی و لمینیت سفارشی را در قالب کارت ID1 خود بگنجانید.

SwiftLaser™ طیف وسیعی از ویژگی‌های امنیتی مانند گیلوش الکترونیکی، چاپ گرادیان UV با وضوح بالا، متن میکرو، CLI یا MLI، جلوه لمسی، سیستم بینایی و انواع روکش‌ها و لایه‌های هولوگرافی سفارشی را ارائه می‌کند.

پرینتر ، لیزر و لمینیت کارت سوییفت پرو:

لیزر پرینتر سوئیفت پرو یک راه حل ایده آل به خصوص جهت مصارف مراکز دولتی که برای  شهروندان کارت ملی یا کارت شهروندی چاپ می نمایند می باشد .امکانات لیزر پرینتر سوئیفت پرو به گونه ای است که به شما این امکان را می دهد ، پس از چاپ رنگی کارت بتوانید بر روی آن  حکاکی لیزری انجام دهید و همچنین پس از آن به وسیله لمینیت سفارشی یا ساده کارت را لمینیت نمایید

سوییفت پرو با ارائه مجموعه ای از ماژول های منحصر به فرد به مشتریان این امکان را ارائه می دهد تا بتوانند سیستم خود را با توجه به نیازشان انتخاب نمایند.انعطاف پذیری و مدولار بودن این سیستم ها باعث میشود که مشتریان بسته به نیازشان پرینتر های خود را به ماژول لیمنیتور یا لیزر و یا هر دو مجهز نمایند .ما به مشتریان توانایی ساخت سیستم های خود را بر اساس برنامه های کارت مورد نظرشان  ارائه می دهیم.

*برای اطلاع از قیمت لیزر پرینتر swift pro با کارشناس فروش تماس حاصل فرمایید

 

SwiftLaser™ is an ideal printer solution for your government to citizen ID programs that offer you the ability to incorporate laser, color printing and custom laminating onto your ID1 card format.

SwiftLaser™ provides a range of security features such as Electronic Guilloche, High-Resolution Gradient UV Printing,

Swift Pro printer, laser and card laminator:

The Swift Pro laser printer is an ideal solution, especially for government centers that print national cards or citizenship cards for citizens. The capabilities of the Swift Pro laser printer allow you to, after printing You can do laser engraving on the color of the card, and then laminate the card with custom or simple lamination.

By providing a set of unique modules, Swift Pro offers customers the possibility to choose their system according to their needs. The flexibility and modularity of these systems makes customers customize their printers according to their needs. equip them with eluminator or laser module or both. We offer customers the ability to build their own systems based on their desired card programs.sMicro Text, CLI or MLI, Tactile Effect, Vision System and a variety of custom holographic overlay and laminat

لیزر پرینتر LC-400 GEN 11

لیزر پرینتر  LC-400 GEN II

لیزر پرینتر LC-400 GEN II ، یک دستگاه حکاکی لیزری رومیزی هوشمند است که تحولی جدید در صنعت پرینت لیزری کارت های پی وی سی می باشد. لیزر پرینتر رومیزی صدور کارت های هوشمند ایمن مانند کارت های شناسایی ملی ، مجوزهای راننده ، کارت های سلامت و کارت های بانکی مورد نیاز است ، کاملاً مناسب است.

این لیزر پرینتر مجهز به خنک کننده بوده و با حکاکی لیزری با کیفیت بسیار بالا قابل تنظیم است. اندازه کوچک و سبک ، LC-400 GEN II را به یکی از بهترین چاپگرهای لیزری رومیزی تبدیل می کند.

. این  لیزر پرینتر می تواند به عنوان یک واحد مستقل شخصی سازی برای کارت های تماسی / بدون تماس و کارت هوشمند کار کند.

لیزر پرینتر LC-400  دارای دو مخزن کارت می باشد که یکی مخزن ورودی با ظرفیت ۳۵۰ عدد کارت و دیگری مخزن خروجی با ظرفیت ۱۰۰ عدد کارت می باشد. این مدل دستگاه دارای یک صفحه نمایش LCD برای استفاده آسان تر می باشد

سری LC ویژگی های امنیتی و رمزگذاری مانند قفل های کلیدی در همه مخزن های ورودی و خروجی کارت ، پشتیبانی اختیاری از MLI یا CLI یا هر دو و استانداردهای ایمنی بالا IEC 60825-1 و استانداردمحصول لیزری رادارا میباشد. کیفیت چاپ پرینتر لیزری سری LC ،۶۰۰ dpi و دارای قابلیت کدکردن نوار مغناطیسی نیز میباشد. این چاپگر راه حل ایده آل برای چاپ کارتهای امنیتی مانند کارتهای شناسایی و بانکی است.

ویژگی ها :

  • اندازه ی کوچک
  • امکان شخصی سازی برای کارت های تماسی / بدون تماس و یا کارت هوشمند
  • وزن (۶۸ کیلوگرم)
  • امنیت و رمزگذاری
  • قفل های کلیدی در مخزن های ورودی و خروجی کارت
  • پشتیبانی اختیاری برای MLI یا CLI یا هر دو
  • استفاده آسان
  • مصرف کم انرژی و سازگار با محیط زیست

 

 

*جهت اطلاع از قیمت لیزر پرینتر  LC-400 GEN II با کارشناس فروش تماس حاصل فرمایید.

LC-400 GEN II – Desktop Laser Engraver

Megakarte Smartcard Corporation offers our new and improved LC-400 Gen II, is a smart desktop laser engraver, bringing laser engraved cards to a whole new level. The Desktop Laser Engraver is appropriate for both centralized and decentralized situations where issuance of large scale of secure smart cards such as national ID’s, driver’s licenses, and bank cards are required

This robust, air cooled, desktop laser engraver is highly customizable with high quality laser engraving. The small size and the light weight of the LC-400 Gen II make it one of the world’s fastest desktop laser printers

The product features a secure laser engraving that ensures a world class card security; it can operate as a stand-alone unit with optional personalization for contact/contactless for both smartcards

LC-400 Gen II-Desktop Laser Engraver secures 350 card input hopper and 100 card in its output hopper. This model has an LCD display for easier use, clear notifications and prompts. The LC-Series brings secure cards to a whole new level with a universal design with front access maintenance, eco-friendly low power consumption and high quality marking

The LC series provides security and encoding features such as key locks on all card input and output hoppers, optional support for MLI or CLI or both and high safety standards IEC 60825-1 standards Class 1 Laser Product. The laser engraving resolution of the LC series is up to 600 dpi and optional magnetic stripe encoding. This printer is the ideal solution for laser engraved cards such as identification and bank cards

COMPACT AND FLEXIBLE

All-in-one compact desk body

Optional support for personalization for contact /contactless for both smart cards

Modular Component Design for quick & easy maintenance

Lightweight (68kg

SECURITY AND ENCODING

Key Locks on all card input and output hoppers

Optional support for MLI or CLI or both

High Safety standard. IEC 60825-1 standards Class 1 Laser Product

EASY-TO-USE

Universal design with front access maintenance

پرینتر لیزری LC-200

پرینتر لیزری کارت پی وی سی LC-200

 دستگاه پرینتر لیزری LC-200 بعد کاملا جدیدی را در زمینه ی پرینت لیزری کارت های پی وی سی ارائه می دهد. این پرینتر برای مراکزی که در آنها صدور آنی کارتهای امنیتی مانند کارت های بانکی ، کارت های سلامت ، گواهینامه های رانندگی و کارت های شناسایی ملی مورد نیاز است مناسب می باشد.

از ویژگی های برجسته  این لیزر پرینتر، بی نیاز بودن آن از هرگونه جوهر یا نوار می باشد ، حکاکی لیزری یک روش کاملا ایمن و قابل اطمینان است برای مواردی که امنیت کارتها از اهمین بالایی برخوردار می باشد.

ویژگی ها ی لیزر پرینتر رومیزی LC-200

 

  • دارای سایز کوچک می باشد و به راحتی بر روی میز دفتر کار قرار می گیرد
  • حکاکی لیزری ایمن ، امنیت جهانی کارت را تضمین می کند
  • ماژول قابل برنامه ریزی CLI / MLI
  • شخصی سازی کارت های بدون تماس ، تماسی و کارت های هوشمند
  • بدون نیاز به مواد مصرفی

 

 

*جهت اطلاع از قیمت لیزر پرینتر LC-200 با کارشناس فروش تماس حاصل فرمایید.

دانلود کاتالوگ لیزر پرینتر LC-200

 

 

LC-200 Desktop Card Laser Engraver

The LC-200 Desktop Card Laser Engraver brings secure ID cards to a whole new dimension. This printer is ideally suited for a decentralized environment where the instant issuance of secure cards such as bank cards, health cards, driver licences and national ID cards are required.

Desktop Card Laser Engraver LC-200 

The LC-200 Desktop Laser Engraver conveys secure ID cards to a totally different measurement. This printer is in a perfect world suited for a decentralized situation where the moment issuance of secure cards, for example, bank cards,k wellbeing cards, driver licenses and national ID are required

With highlights, for example, single card feed just as no consumable expenses for ink or strip for printing, the laser engraver is both simple to utilize and savvy to satisfy all your on need card etching

needs in a protected domain

The LC-200 Desktop Laser Engraver Features and Benefits are

Small footprint fi ts easily on the desktop in the office

Our software user interface complies with industry-standard interfaces world-wide

Can operate as a stand-alone unit

Secure laser engraving ensures world-class card security

Programmable CLI/MLI module

Personalization of contactless cards and contact Smart Cards

Modular components minimize the need for routine maintenance

No consumables

خدمات پس از فروش

برخی از خدمات شرکت مانی پردازش به طور مختصر شامل موارد زیر می باشد :

  • یک سال گارانتی تجهیزات
  • پنج سال خدمات پس از فروش
  • آموزش سرویس و نگهداری رایگان
  • تامین قطعات مربوط به دستگاهها
  • ارائه نسخه های جدید نرم افزار و دستگاهها
  • ریبون های چاپ کارت
  • تامین انواع کارت پی وی سی  ( کارت ساده ،کارت مغناطیسی ، کارت بدون تماس ، کارت هوشمند )
  • تعمیر سخت افزاری و تعویض قطعات معیوب
  • ارتقاء نرم افزار داخلی پرینتر
  • سرویس دوره ای پرینتر
  • مشاوره ،طراحی و اجرای پروژه های دوربین مداربسته
  • فروش،نصب،راه اندازی دوربین های تحت شبکه IP Camera